Clubman Project Specifications
- Multi tubular space frame (based on Locost).
- Fibreglass nose cone, cycle guards, bonnet, scuttle and rear end (w/ lockable boot lid and sealed boot), nascelles behind occupants heads.
- Towing eyes front and rear.
- Roll over bar – w/ centre mounted high level brake light and windblocker (perspex infill).
- Front suspension – wishbones w/fully adjustable Spax coil over shocks.
- Rear suspension – MX5 independent (upper and lower wishbones) w/fully adjustable Koni coil over shocks.
- Steering – rack and pinion, collapsible column, all MX5 switch gear, Autotechnica flat bottomed sports steering wheel.
- Brakes – 4 wheel discs, dual circuit hydraulic (no servo), adjustable pedal box, handbrake on rear wheels, professionally serviced by Tilbrooks.
- Drive train – 1.6 litre, twin cam, 16 valve, fuel injected MX5 engine and 5 speed gearbox, balanced prop shaft and MX5 differential.
- Power plant frame – Torque tube joining gearbox and diff (running inside transmission tunnel)
- Cooling – new radiator w/electric fan
- Fuel tank – steel, approx 45 litre capacity, pump, sender unit, chrome Jaguar XJ6 lockable filler cap between headrest nacelles
- Instruments – Standard MX5 instrument panel mounted on steering column, plus 3 additional instruments in centre fibreglass dash panel angled towards driver. (clock, amps & oil temp)
- Electrical system – Complete wiring loom - ECU, instruments, 2 speed wipers, 2 speed heater, radio
- Lighting system – separate headlights incorporating park lights, front indicators from Ducati M/C, side indicator repeaters, separate tail/brake and indicator lights, single reversing light, number plate light, instrument panel lights with rheostat.
- Exhaust system – Ceramic coated 4 into 1 extractors, catalytic converter, stainless steel side muffler, rear exit, fibreglass heat shield.
- Windscreen – Black powder coated frame, w/side and centrally mounted rear vision mirrors.
- Spare wheel carrier and securing mount, number plate mount and light.
- Grille 3/8 in black steel rod.
- Heater 2 speed – 2 position (feet/legs & demist).
- Safety Belts Retractable lap sash belts as standard (ADR req).
- Transmission tunnel cover fibreglass.
- Cloth faced 2 piece seats and head rests.
- Vinyl Trim on sides, t/x tunnel sides and behind seats.
- Paint Yellow Devil(Holden Monaro colour).
- Side Panels polished aluminium.
- Immobiliser.
- Lockable glove boxes (in upper rear between seats and in front of passenger).
- Road wheels and tyres Na6a MX5 7 spoke mags w/Bridgestone Potenza G111 185/60R14 82H tyres.
- Sway bars front and rear.